Male-to-Male Qwiic Connector Cable

Male-to-Male Qwiic Connector Cable

$1.25
/
Shipping calculated at checkout.
Only 2913 items in stock!

This item is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic-enabled components together for I2C communication.

Each Qwiic Cable's wires have been color coded to Red (Power), Black (GND), Blue (SDA), and Yellow (SCL).

Technical Data:

  • Manufacturer - Molex
  • Datasheet
  • Length - 100 mm
  • Terminator - 1mm JST
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America
Blues Starter Kit for North America

Blues Starter Kit for North America

$99.00
/
Shipping calculated at checkout.

 

 

The Blues Starter Kit contains everything you need to start building connected solutions with the Notecard and Notehub.io. Start with LTE Cat-1 cellular or Wi-Fi and build your first MCU-powered app with the Notecarrier F and Swan. Or connect the Notecard to a Raspberry Pi or Pi-compatible SBC using the included Pi Hat.

 

Kit Contents: 

  • LTE Cat-1 North America Notecard
  • Wi-Fi Notecard
  • Notecarrier F
  • Swan 3.0
  • Notecarrier Pi Hat
  • Molex flexible dual Wi-Fi and Cellular Antenna

 

LTE Cat-1 Notecard – North America is designed to be used in the North America region and uses a Quectel EG91-NAX modem that connects to LTE Cat-1 / WCDMA networks. 

LTE Cat-1 Specs:

  • Integrated Quectel cellular modem.
  • Secure element with a factory-installed ECC P-384 certificate provisioned at chip manufacture.
  • Integrated GPS and Accelerometer.
  • Designed operate on battery power, be "always-on" to maintain time & location, while typically drawing less than 8µA, when idle.
  • Bundled with 10-years and 500MB of cellular data. No cellular subscriptions, SIM fees or monthly minimums apply.
  • PTCRB Certified Module.

 

Wi-Fi Notecard Specs:

  • Integrated Silicon Labs Wi-Fi Transceiver.
  • Secure element with a factory-installed ECC P-384 certificate provisioned at chip manufacture.
  • Designed to operate on battery power, be "always-on" to maintain time & location, while typically drawing less than 8µA, when idle.
  • Battery-powered Wi-Fi without the complexity of managing connections, queues, or storage.
  • Utilizes an extremely thin cloud infrastructure that directly routes your data to where it belongs: AWS, Azure, GCS, or your own cloud.
  • Data routing and simple "no code/low code" visual data stream analysis through Notehub.io (SaaS), or host and integrate Notehub functionality into your own app (OSS).

 

Notecarrier F is a companion development board designed for quick prototyping with Adafruit Feather-based microcontrollers. It can be used with any Feather-compatible device and includes Qwiic ports for connecting I2C peripherals.

Notecarrier F Specs:

  • Adafruit Feather compatible header socket.
  • Breadboard compatible Notecard 13-pin header.
  • Breadboard compatible 24-pin Adafruit Feather breakout header.
  • Notecard edge connector socket and mounting screw receptacle.
  • Micro-USB port to power Notecarrier and provide a USB Serial command interface to Notecard.
  • External Nano-SIM slot for additional carrier connectivity.
  • 2 Qwiic/StemmaQT I2C ports for attaching external peripherals to your project.
  • JST PH connector for a LiPo battery.
  • JST PH connector for a solar panel.
  • JST PH connector for V+
  • JST SH 3.3V I2C connector.
  • Battery slide switch to disconnect battery when not in use.
  • Momentary button connected to Feather B0 pin.
  • Front and back pin labels 

  

Swan is a low-cost, embeddable STM32L4-based microcontroller designed to accelerate the development and deployment of battery-powered IoT solutions. It is especially useful for applications requiring large memory or a high degree of I/O expandability at an affordable cost, such as edge inferencing and remote monitoring.

Swan 3.0 Specs:

  • Ultra low-power Arm Cortex-M4 core clocked at 120Mhz
  • STM32L4R5-based microcontroller
  • 2MB of flash and 640KB of RAM
  • Castellated-edge access to 55 GPIO ports including:
    • 8 analog
    • 16 digital
    • 4x I2C, 3x SPI
    • USB OTG full speed
    • 1x 14-channel DMA
    • tRNG
    • 12-bit ADC, 2 x 12-bit DAC
    • low-power RTC, and CRC calculation peripherals
  • Qwiic connector
  • Outboard DFU Support

 

Notecarrier-Pi Hat is designed for drop-in development with a Raspberry Pi or compatible Single Board Computer. It includes a pre-soldered female 40-pin header connector for plugging directly into the Raspberry Pi, and a 40-pin connector on top for stacking other Pi “hats” and devices. It also includes a single Grove I2C port for attaching external peripherals to your project.

Notecarrier Pi Hat Specs:

  • M.2 Key E edge connector port and screw-down port for Notecard.
  • 1 Grove I2C port for attaching external peripherals to your project.
  • Pre-soldered female 40-pin header connector for plugging directly into a Pi or another Pi hat.
  • Pre-soldered male 40-pin header connector for stacking additional Pi hats.
  • Slot for external Micro SIM for external carrier connectivity.

     

    Molex Antenna has a supported frequency range of 698 MHz to 3.8 GHz and a u.FL terminator, this Molex Flexible antenna is the quickest way to get your Cellular or Wi-FI Notecard online.

    Molex Antenna Specs:

    • Manufacturer - Molex
    • Datasheet
    • Length - 85 mm
    • Width - 14.5 mm
    • Height - 0.1 mm
    • Cable length - 180 mm
    • Cable Type - 180 mm Coax


    Additional Resources: 

    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA
    Blues Starter Kit for EMEA

    Blues Starter Kit for EMEA

    $99.00
    /
    Shipping calculated at checkout.

     

     

    The Blues Starter Kit contains everything you need to start building connected solutions with the Notecard and Notehub.io. Start with LTE Cat-1 cellular or Wi-Fi and build your first MCU-powered app with the Notecarrier F and Swan. Or connect the Notecard to a Raspberry Pi or Pi-compatible SBC using the included Pi Hat.

     

    Kit Contents: 

    • LTE Cat-1 EMEA Notecard
    • Wi-Fi Notecard
    • Notecarrier F
    • Swan 3.0
    • Notecarrier Pi Hat
    • Molex flexible dual Wi-Fi and Cellular Antenna

     

    LTE Cat-1 Notecard – EMEA is designed to be used in the EMEA (Europe, Middle East, Africa) regions and uses Quectel EG91-EX modem which connects to LTE Cat-1 / WCDMA / GSM networks.

    LTE Cat-1 Specs:

    • Integrated Quectel cellular modem.
    • Secure element with a factory-installed ECC P-384 certificate provisioned at chip manufacture.
    • Integrated GPS and Accelerometer.
    • Designed operate on battery power, be "always-on" to maintain time & location, while typically drawing less than 8µA, when idle.
    • Bundled with 10-years and 500MB of cellular data. No cellular subscriptions, SIM fees or monthly minimums apply.
    • PTCRB Certified Module.

     

    Wi-Fi Notecard Specs:

    • Integrated Silicon Labs Wi-Fi Transceiver.
    • Secure element with a factory-installed ECC P-384 certificate provisioned at chip manufacture.
    • Designed to operate on battery power, be "always-on" to maintain time & location, while typically drawing less than 8µA, when idle.
    • Battery-powered Wi-Fi without the complexity of managing connections, queues, or storage.
    • Utilizes an extremely thin cloud infrastructure that directly routes your data to where it belongs: AWS, Azure, GCS, or your own cloud.
    • Data routing and simple "no code/low code" visual data stream analysis through Notehub.io (SaaS), or host and integrate Notehub functionality into your own app (OSS).

     

    Notecarrier F is a companion development board designed for quick prototyping with Adafruit Feather-based microcontrollers. It can be used with any Feather-compatible device and includes Qwiic ports for connecting I2C peripherals.

    Notecarrier F Specs:

    • Adafruit Feather compatible header socket.
    • Breadboard compatible Notecard 13-pin header.
    • Breadboard compatible 24-pin Adafruit Feather breakout header.
    • Notecard edge connector socket and mounting screw receptacle.
    • Micro-USB port to power Notecarrier and provide a USB Serial command interface to Notecard.
    • External Nano-SIM slot for additional carrier connectivity.
    • 2 Qwiic/StemmaQT I2C ports for attaching external peripherals to your project.
    • JST PH connector for a LiPo battery.
    • JST PH connector for a solar panel.
    • JST PH connector for V+
    • JST SH 3.3V I2C connector.
    • Battery slide switch to disconnect battery when not in use.
    • Momentary button connected to Feather B0 pin.
    • Front and back pin labels 

      

    Swan is a low-cost, embeddable STM32L4-based microcontroller designed to accelerate the development and deployment of battery-powered IoT solutions. It is especially useful for applications requiring large memory or a high degree of I/O expandability at an affordable cost, such as edge inferencing and remote monitoring.

    Swan 3.0 Specs:

    • Ultra low-power Arm Cortex-M4 core clocked at 120Mhz
    • STM32L4R5-based microcontroller
    • 2MB of flash and 640KB of RAM
    • Castellated-edge access to 55 GPIO ports including:
      • 8 analog
      • 16 digital
      • 4x I2C, 3x SPI
      • USB OTG full speed
      • 1x 14-channel DMA
      • tRNG
      • 12-bit ADC, 2 x 12-bit DAC
      • low-power RTC, and CRC calculation peripherals
    • Qwiic connector
    • Outboard DFU Support

     

    Notecarrier-Pi Hat is designed for drop-in development with a Raspberry Pi or compatible Single Board Computer. It includes a pre-soldered female 40-pin header connector for plugging directly into the Raspberry Pi, and a 40-pin connector on top for stacking other Pi “hats” and devices. It also includes a single Grove I2C port for attaching external peripherals to your project.

    Notecarrier Pi Hat Specs:

    • M.2 Key E edge connector port and screw-down port for Notecard.
    • 1 Grove I2C port for attaching external peripherals to your project.
    • Pre-soldered female 40-pin header connector for plugging directly into a Pi or another Pi hat.
    • Pre-soldered male 40-pin header connector for stacking additional Pi hats.
    • Slot for external Micro SIM for external carrier connectivity.

       

      Molex Antenna has a supported frequency range of 698 MHz to 3.8 GHz and a u.FL terminator, this Molex Flexible antenna is the quickest way to get your Cellular or Wi-FI Notecard online.

      Molex Antenna Specs:

      • Manufacturer - Molex
      • Datasheet
      • Length - 85 mm
      • Width - 14.5 mm
      • Height - 0.1 mm
      • Cable length - 180 mm
      • Cable Type - 180 mm Coax


      Additional Resources: 

      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit
      Sparrow Development Kit

      Sparrow Development Kit

      $199.00
      /
      Shipping calculated at checkout.

      Sparrow is a developer toolkit that aims to help you lower communication costs by using shared cellular or Wi-Fi connectivity with a cluster of low-cost LoRa sensors. Imagine a scenario where you have 10-15 sensors spread throughout a facility. Instead of using one Notecard per sensor, Sparrow uses LoRa to communicate between the sensors and a single Notecard-powered Sparrow gateway to backhaul data to Notehub.io.

      With Sparrow, our familiar JSON-based development experience is extended all the way down to individual LoRa sensor nodes: JSON is sent from sensors to the LoRa gateway, securely routed through the Notecard, then on to Notehub and your cloud app of choice.

      The Sparrow Development Kit contains everything you need to get started building device cluster applications with the Notecard.

      Kit Contents:

      • A Wi-Fi Notecard

      • A Notecarrier A with upgraded antennas and Qwiic connectors

      • 2 Sparrow Reference Sensors with onboard motion (PIR), temp, and humidity (BME280) sensors in a ready-to-deploy enclosure

      • 3 Sparrow Essentials Boards (one for Gateway and two for adding your own sensors)

      • 4 AAA Lithium Batteries for the Reference sensors

      • 3 CR2032 Coin cell batteries for the Essentials boards

      • 1 STLINK-V3MINI for sensor programming

      • 1 USB Cable

      • 1 Female-to-Female JST SH (Qwiic) connector for turning your Notecard and Notecarrier into a LoRa gateway 

      After purchasing a Sparrow Kit, head over to dev.blues.io to learn more about Sparrow, how to set up your devices, connect to Notehub.io and even host your own Sparrow app dashboard so you can monitor your devices from anywhere.

      Additional Resources:

      Note: the Sparrow module is currently pending FCC certification. Customers should avoid deploying Sparrow sensors in a production setting until certification is finalized in early 2023.